Cosmos Dental Model SLA
Compatible with printers
Once again Yller is at the forefront! For over 12 years we have been working in research of resin materials applied to dentistry. And nothing more fitting than to be the company that anticipates the future… We are the first dental industry to manufacture resins for 3D printers in Brazil. We introduce here the product line that was born with the excellence expected by the best professionals: Cosmos!
cosmos: print the universe
|
Excellent print quality It's possible to get the most detail, perfect for professionals who demand high quality prints. |
|
Low viscosity Cleaning 3D printers can be a time-consuming process depending on the resin used. Cosmos Line resins have low viscosity, which facilitates equipment cleaning. |
|
High speed resins Our resins feature high polymerization speed and print quality! |
| PROPERTIES | RESULTS | ISO REQUIREMENT | ISO REQUIREMENT |
|---|---|---|---|
| Shore D Hardness | 86 | > 80 | ISO 178 |
| Density | 1,1 g/mm3 | - | - |
| Viscosity | 700 - 1200 cps | - | - |
| Flash Point | > 95°C | - | - |
| Performance | about 50 models | - | - |
SLA technology
The SLA Line was developed for printers that use laser stereolithography (SLA) technology, a method that uses light to solidify a light-curing resin. In this case, the printer’s laser reaches the resin that is stored in the vat, leading to polymerization of the material. The process occurs layer by layer until the desired model is formed.
varied indications
SLA technology provides an ultra fine surface finish. The advantage of this printing method lies in the quality of the model obtained: higher level of detail, higher resolution, in addition to superior finishing quality. In general, SLA printing is suitable for more complex and curved shapes.
SLA Line resins can be used by professionals who use FormLabs printers.
check out more products from the line:
