1. Product Identification
1.1. TECHNICAL NAME
3D Printing Resin
1.2. PRODUCT COMMERCIAL NAME
COSMOS SG – Surgical Guides Printing
1.3. DESCRIPTION OF THE PHYSICAL PRINCIPLE AND FUNDAMENTALS OF THE PRODUCT TECHNOLOGY, APPLIED FOR ITS FUNCTIONING AND ACTION
COSMOS SG is a resin for 3D printing of dental surgical guides on printers operating at wavelengths between 250nm and 410nm.
1.4. Specifications and technical characteristics
1.4.1 Composition
| COMPONENTS |
|---|
| Oligomers |
| Monomers |
| Photoinitiators |
| Stabilizer |
| Pigment |
2. Storage
Store in a dry place, with temperature between 2ºC and 28ºC.
3. Instructions for use
– When handling the product, the use of personal protective equipment such as gloves and goggles is recommended. – Add a sufficient amount of resin to the 3D printer reservoir. – Select the file and printer settings and proceed to print. For printers not approved by Yller, we suggest that you initially print a calibration part. See how to do it here – After printing, immerse the intraoral device in ethyl alcohol, isopropyl alcohol or cleaning solution for 10 minutes. – After drying the part, perform a post-cure in a UV chamber of at least 36W for 10 minutes. – Disinfect/sterilize in chemical solution or autoclave before use.
4. Precautions, restrictions, warnings
4.1. PRECAUTIONS
– The product should be used by professionals. – Keep the product out of the reach of children.
4.2. RESTRICTIONS AND WARNINGS
– Do not use the product on people with a history of allergy to acrylates and methacrylates.
5. Use
Surgical guides printing.
6. Validity
See manufacturing and expiry dates on the packaging.
Product Registration
Reg. Anvisa Nº: 81009350022
Yller Biomaterials SA is not responsible for damages, of any nature, caused by incorrect use or use not foreseen in the instructions of use.
MANUFACTURED AND DISTRIBUTED BY:
Yller Biomaterials SA Address: Av. São Francisco de Paula, 3852, Bairro Areal, Pelotas / RS, 96080-730 Phone: (53) 3027 3933 / www.yller.com.br / sac@yller.com.br CNPJ: 16.970.346/0001-52 Technical Responsibility: Aline de Oliveira Ogliari CRO/RS Nº 19623 REV00
