1. Product Identification
1.1. TECHNICAL NAME
3D Printing Resin
1.2. PRODUCT COMMERCIAL NAME
COSMOS
1.3. DESCRIPTION OF THE PHYSICAL PRINCIPLE AND FUNDAMENTALS OF THE PRODUCTS’ TECHNOLOGY, APPLIED FOR ITS FUNCTIONING AND ITS ACTION
COSMOS is a resin for 3D printing on printers operating at wavelengths between 250nm and 410nm.
1.4. SPECIFICATIONS AND TECHNICAL CHARACTERISTICS
1.4.1 Composition
Oligomers, monomers, photoinitiators, stabilizer, pigment.
2. Storage
Store in a dry place, with temperature between 2ºC and 28ºC.
3. Instructions for use
a. When handling the product, the use of personal protective equipment such as gloves and goggles is recommended.
b. Add a sufficient amount of resin to the 3D printer reservoir.
c. Select the file and printer settings and proceed to print. On printers not approved by Yller, it is suggested to initially perform the printing of a calibration part. See how to do it here!
d. After printing, immerse the intraoral device in ethyl alcohol, isopropyl alcohol or cleaning solution for 10 minutes.
d. After printing, immerse the intraoral device in ethyl alcohol, isopropyl alcohol or cleaning solution for 10 minutes.
4. Precautions, restrictions, warnings
4.1. PRECAUTIONS
– COSMOS should be used by professionals. – Keep the product out of the reach of children.
4.2. RESTRICTIONS AND WARNINGS
– Do not use the product on people with a history of allergy to acrylates and methacrylates.
5. Use
COSMOS is a resin suitable for 3D printing.
6. Validity
See expiration date on package.
Yller Biomaterials SA is not responsible for damages, of any nature, caused by incorrect use or use not foreseen in the instructions of use.
MANUFACTURED AND DISTRIBUTED BY:
Yller Biomaterials SA Address: Av. São Francisco de Paula, 3852, Bairro Areal, Pelotas / RS, 96080-730 Phone: (53) 3027 3933 / www.yller.com.br / sac@yller.com.br CNPJ: 16.970.346/0001-52 Technical Responsibility: Aline de Oliveira Ogliari CRO/RS Nº 19623 REV00
